4-3-1. lacp working ports – Milan Technology MIL-SM2401M-STK User Manual
Page 126
118
6-4-3-1. LACP Working Ports
Group: Displays the trunk group ID.
LACP: Press the Space key to enable or disable LACP (Link Aggregation
Control Protocol) support. If enabled, the group is an LACP static trunking group.
If disabled, the group is a local static trunking group.
LACP Work Port Num: The maximum number of ports that can be aggregated
at the same time. If the group is an LACP static trunking group, the exceed
ports is standby and able to aggregate if the work ports fail. If the group is a
local static trunking group, the number must be the same as group ports.
NOTE: Before setting LACP support, you must first set the trunk group using
the Port / Trunk Configuration screen.
Actions->
menu line.