Milan Technology MIL-SM2401M-STK - Manual (Page 41)

33
5-2-3. Trunk Commands Set
Commands
Command
Level
Description Defaults Example
port group
[group-number]
[port-list] lacp
[on | off] workp
[work ports]
no port group
[group-number]
lacp [on | off]
workp [work
ports]
Global
configuration
mode
Add trunking
group.
Use the no form of
this command to
delete trunking
group.
Disable
LACP:
Switch (config)# port
group 1 1-4
lacp on workp 2
Trunk without LACP:
Switch (config)# port
group 1 1-4
lacp off workp 4
show group
[group-ID]
Privileged
EXEC mode
Display trunk group
information. If there
is no group-number
in put, display all
trunk groups.
Switch # show group
1
Group Trunk.1:
Ports: 02 03 04
Priority: 0001
Lacp: Enable
Work ports: 0
port group
[group-number]
activityport
[port-list]
Global
configuration
mode
Set trunking group
port active
Switch (config)# port
group 3 activityport
2-4
Trunk.1 Lacp:
Enable
Check OK!
NEW: 2 4