Milan Technology MIL-SM2401M-STK - Manual (Page 132)

124
6-4-5-2. 802.1x System Configuration
After enabling the IEEE 802.1x function, use the 802.1x System Configuration
screen to configure the IEEE 802.1x parameters.
Radius Server IP: Enter the Radius Server IP address.
Shared Key: Enter an encryption key for use during authentication sessions
with the specified radius server. This key must match the encryption key used
on the Radius Server.
NAS, Identifier: Enter the identifier for the radius client.
Server Port: Enter the UDP destination port for authentication requests to the
specified Radius Server.
Accounting Port: Enter the UDP destination port for accounting requests to
the specified Radius Server.
Actions->
: Configures all items. When finished, pressing ESC returns to the action
menu line.
: Saves all configured values.
: Exits this page and returns to previous menu.