Milan Technology MIL-SM2401M-STK - Manual (Page 39)

31
State [Enable |
Disable]
Interface
configuration
mode
Use the state
interface
configuration
command to specify
the state mode of
operation for
Ethernet ports. Use
the disable form of
this command to
disable the port.
Enable
Switch (config)#
interface
fastEthernet 0/1
Switch (config-if)#
state disable
show interface
configuration
Interface
configuration
mode
show interface
configuration status
Switch (config)#
interface
fastEthernet 0/1
Switch (config-if)#
show interface
configuration
show interface
status
Interface
configuration
mode
show interface actual
status
Switch (config)#
interface
fastEthernet 0/1
Switch (config-if)#
show interface
status
show interface
accounting
Interface
configuration
mode
show interface
statistic counter
Switch (config)#
interface
fastEthernet 0/1
Switch (config-if)#
show interface
accounting