Milan Technology MIL-SM2401M-STK - Manual (Page 33)

25
5-2. Commands Set List
5-2-1. System Commands Set
Commands
Command
Level
Description Defaults Example
system name
[systemname]
Global
configuration
mode
Set switch system
name string
Switch (config)#
system name xxx
system location
[system
location]
Global
configuration
mode
Set switch system
location string
Switch (config)#
system location
xxx
system
description
[systemdescript
ion]
Global
configuration
mode
Set switch system
description string
Switch (config)#
system
description xxx
system contact
[systemcontact]
Global
configuration
mode
Set switch system
contact window string
Switch (config)#
system contact
xxx
ip address
[ip-address]
[subnet-mask ]
[ gateway]
Global
configuration
mode
Use the ip address
interface configuration
command to set an IP
address for a switch.
Use the no form of this
command to remove
an IP address or to
disable IP processing.
Switch (config)#
ip address
192.168.1.1
255.255.255.0
192.168.1.254