Milan Technology MIL-SM2401M-STK - Manual (Page 183)

175
7-4-8-1. System Configuration
Spanning Tree information for the Root Bridge at the bottom is for display only.
Configure new values for the STP parameters at the top.
STP State: Enable the Spanning Tree function by marking the box.
Priority: The value used to identify the root bridge. The bridge with the lowest
value has the highest priority and is selected as the root. Enter a number 1
through 65535.
Max Age: The number of seconds a bridge waits without receiving
Spanning-Tree Protocol configuration messages before attempting a
reconfiguration. Enter a number 6 through 40.