Milan Technology MIL-SM2401M-STK - Manual (Page 31)

23
5.
CLI Management Interface
To enter CLI Command management interface, type “enable” at the command
prompt. The following tables list the CLI commands and descriptions.
5-1. Commands Level
Modes
Access
Method
Prompt
Exit
Method
About This Mode1
User EXEC
Begin a
session with
your switch.
Switch>
Enter logout
or quit.
The user commands
available at the user
level are a subset of
those available at the
privileged level.
Use this mode to
• Perform basic tests.
• Display system
information.
Privileged
EXEC
Enter the
enable
command
while in user
EXEC mode.
Switch#
Enter
disable to
exit.
The privileged
command is advance
mode
Privileged this mode to
• Display advance
function status
• Save configures
Global
Configuration
Enter the
configure
command
Switch
(config)#
To exit to
privileged
EXEC
Use this mode to
configure parameters
that apply to your