Milan Technology MIL-SM2401M-STK - Manual (Page 72)

64
6-2-1. Port Status
Type: Displays port connection speed.
Link: Displays the port's link status. When the port is connecting with the device
and working normally, the link status is “UP”. When the port has no link, the link
status is “Down”.
State: A port that is enabled will be displayed as “Enable”. A port that is disabled
will be displayed as “Disable”.
Negotiation: Displays the state of Auto-negotiation as either "Auto" or "Fixed".
Speed / Duplex: Displays the port speed and duplex mode.
FC: Displays the flow control for the port as being either on or off.
BP: Indicates if Back Pressure capability is enabled or disabled, only valid for
HDX mode of operation.
Bandwidth In/Out: Indicates the Ingress bandwidth rate limiting speed in
increments of 100 kbps, 0 indicates port is at full bandwidth in.
Priority: Indicates whether traffic received on this port is put into the high priority
or low priority queue or do not care.
Security: Indicates whether or not source MAC address based traffic filtering is