Milan Technology MIL-SM2401M-STK - Manual (Page 148)

140
7-2. Port Status
Link: “Down” is “No Link”. “UP” is “Link”.
State: Displays port status off or on depending on user setting. “Unlink” means
the port is offline or “off ”.
Auto Negotiation: Displays the auto negotiation mode. There are three
selections: Auto, Force and Nway-force.
Speed Duplex: Displays link speeds of 1000Mbps or 100Mbps or 10Mbps and
full duplex or half-duplex mode.
Flow Control: Displays the flow control status as enabled or disabled in
full-duplex mode.
Back Pressure: Displays the backpressure status as enabled or disabled in
half-duplex mode.
Bandwidth: Displays the ports incoming and outgoing bandwidth.
Priority: Displays the port static priority status as High or Low or Disable.
Port Security: Displays the port security as enabled or disabled.
Config: Displays the setting configured by the user.
Actual: Displays the negotiation result.
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering