Milan Technology MIL-SM2401M-STK - Manual (Page 38)

30
security on or no
security
Interface
configuration
mode
Use the security
configuration
command on
Ethernet ports.
Use the no form of
this command to
disable security on
the port.
Disable
Switch (config)#
interface
fastEthernet 0/1
Switch (config-if)#
security on
priority on [hi |
low] or no
priority
Interface
configuration
mode
Use the priority
configuration
command on
Ethernet ports.
Use the no form of
this command to
disable security on
the port.
Disable
Switch (config)#
interface
fastEthernet 0/1
Switch (config-if)#
priority on hi
Bandwidth [in |
out] [value]
Interface
configuration
mode
Set bandwidth in or
out rate. The value
rage is (0~999), and
zero of the value is
disable
(The module can’t be
setting)
Disable
Switch (config)#
interface
fastEthernet 0/1
Switch (config-if)#
bandwidth in 50