Milan Technology MIL-SM2401M-STK - Manual (Page 37)

29
speed
[10 | 100 | 1000 |
auto]
Interface
configuration
mode
Use the speed
configuration
command to specify
the speed mode of
operation for Fast
Ethernet.
Auto
Switch (config)#
interface
fastEthernet 0/1
Switch (config-if)#
speed 10
speed [10| 100 |
1000 | auto]
Interface
configuration
mode
Use the speed
configuration
command to specify
the speed mode of
operation for module
Ethernet.
(The 100Base-FX
module only
supported for speed
100)
(The 1000Base-FX
module only
supported for speed
1000 & auto)
Switch (config)#
interface
fastEthernet 1/2
Switch (config-if)#
speed 1000
flowcontrol on or
no flowcontrol
Interface
configuration
mode
Use the flow control
configuration
command on
Ethernet ports to
control traffic rates
during congestion.
Use the no form of
this command to
disable security on
the port.
On
Switch (config)#
interface
fastEthernet 0/1
Switch (config-if)#
flowcontrol on