Milan Technology MIL-SM2401M-STK - Manual (Page 20)

12
Rack-mounted Installation
The MIL-SM2401M-STK switch come with a rack-mounted kid and can be
mounted in an EIA standard size, 19-inch Rack. The switch can be placed in a
wiring closet with other equipment.
Perform the following steps to rack mount the switch:
A. Position one bracket to align with the holes on one side of the switch and
secure it with the smaller bracket screws. Then attach the remaining bracket
to the other side of the Switch.
Figure 2-5. Attach mounting brackets with screws