Milan Technology MIL-SM2401M-STK - Manual (Page 66)

58
Or
no 8021x
supptimeout
an EAP request.
8021x misc
servertimeout
[SEC]
Or
no 8021x
servertimeout
Global
configuration
mode
Set the period of time
the switch wait for a
server response to an
authentication request.
Switch(config)#
8021x misc
servertimeout 50
8021x misc
maxrequest
[Number]
Or
no 8021x
maxrequest
Global
configuration
mode
Set the number of
authentication that must
time-out before
authentication fails and
the authentication
session ends.
Switch(config)#
8021x misc
maxrequest 2
8021x misc
reauthperiod
[SEC]
Or
no 8021x
reauthperiod
Global
configuration
mode
Set the period of time
after which clients
connected must be
re-authenticated..
Switch(config)#
8021x misc
reauthperiod 20
8021x prostate
[reject | accept |
authorize |
disable]
Interface
configuration
mode
Use the 802.1x port
state interface
configuration command
to set the state of the
selected port.
„ Reject: the specified
port is required to be
held in the
unauthorized state.
„ Accept: the specified
Switch (config)#
interface
fastethernet 0/3
Switch (config-if)#
8021x portstate
accept