FARGO electronic HDP820 - Manual (Page 95)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0) 81
E-card Encoding Errors
Resolving the Job Mismatch error
Symptom: The Job Mismatch error is displayed on the LCD while running a batch print job
with E-card Encoding
Step Procedure
1 Cancel the current print job.
2 Remove any cards that are still in the Printer.
3 Visually check the last card that was printed properly.
4 Restart the print job using the last successfully printed card as a reference for
where to start.