Section 7: packing the hdp800 series card printer – FARGO electronic HDP820 User Manual
Page 272
RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0)
437
Section 7: Packing the HDP800 Series Card
Printer
The purpose of this section to provide the User with a specific packing procedure for the
HDP 800 Series Card Printer.
Follow this instruction to pack the Card Printer for transport.
Step Procedure
1
Clean the inside of the Printer with deionized air. Wipe it down with a lint-free
cloth.
2
Clean the Printhead with a Printhead pen.
3
Insert the cardBoard dancer stiffener into the base Module.
4
Lock the Release Lever to secure the latch mechanism.
5
Pack the Printer in the original carton and packing materials.
6
Be sure to enclose any necessary paperwork, test cards, etc.