FARGO electronic HDP820 - Manual (Page 270)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0) 256
Cleaning the Platen Rollers
Step Procedure
1 Leave the Printer power ON and open the Print and Transfer Stations.
If using a Printer with a Card Lamination Module attached, also open the
Lamination Module's Top Cover and Lamination Station.
2 Remove the Print Ribbon and HDP Film.
3 Locate the Print Platen Roller, as shown below.
4 Use a Cleaning Pad from the Printer Cleaning Kit to wipe the roller clean.
Continued on the next page
Print Platen Roller