FARGO electronic HDP820 - Manual (Page 14)

RESTRICTED USE ONLY FARGO Electronic, Inc.
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0) xiv
Reviewing Lamination Module Boot up Sequence
Step Process
1 The Lamination Headlift turns until the head up position is returned from Headlift
Sensor.
2 The Lamination Ribbon Motor activates to determine the presence of a roll of
lamination.
3 The Lamination Flipper table homes itself.
4 The Card Sensor checks for the presence of a card and ejects it if found.