FARGO electronic HDP820 - Manual (Page 27)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0) 13
Technical Specifications (continued)
Term Description
Display User-friendly, SmartScreen LCD Control Panel; LED display on
Card Lamination Module.
Encoding Options • ISO Magnetic Stripe Encoding Module, dual high- and low-
coercivity, Tracks 1, 2 and 3
• JIS II Magnetic Stripe Encoding Module
• E-card Docking Station (required for all e-card options or 3rd
party smart card encoding)
• Contact Smart Card Encoder (ISO 7816), Parts 1-4; T=0 & T=1
• Contactless Smart Card Encoder (MIFARE ® )
• Prox Card Encoder (HID read-only) (Note: Corporate Express
1000 Cards can be used with special order Weigand/ASCII
Converter)
Fargo Certified
Supplies Fargo Card Printer/Encoders require highly specialized media to
function properly. To maximize printed card quality and durability,
printhead life and printer/encoder reliability, use only Fargo Certified
Supplies, Fargo warranties are void, where not prohibited by law,
when non-Fargo Certified Supplies are used.
HDP Film Options • Clear, 1,250 prints
• Standard Holographic
• Custom Holographic, special order
HDP Film Storage
Temperature 77ºF (25ºC) or lower for no longer than 1.5 years.
Humidity 20% to 80% Non-Condensing.
Input Hopper Card
Capacity HDP820/HDP820-LC: 250 cards (.030"/.762mm)
HDP825/HDP825-LC: 200 cards (.030"/.762mm)
Interface • Centronics parallel, IEEE-1284 Compliant
• Optional USB to Parallel Adaptor
• Interfacing information for E-card Options
Continued on the next page