FARGO electronic HDP820 - Manual (Page 202)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0) 188
Adjusting the Ribbon Type
Use the Ribbon Type dropdown menu to match ribbon type.
Step Procedure
1 Adjust to match the Ribbon Type selection with the ribbon type that is loaded in
the Printer.
• YMC: Yellow, Magenta, Cyan
OR
YMCK: Yellow, Magenta, Cyan, Resin Black
OR
• YMCKK: Yellow, Magenta, Cyan, Resin Black, Resin Black
OR
• YMCKH: Yellow, Magenta, Cyan, Resin Black, Heat Seal