FARGO electronic HDP820 - Manual (Page 260)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP 800 Series Card Printer/Encoders Service Manual (Rev. 5.0) 246
Cleaning inside the Printer
Step Procedure
1 Open the Print Station and Transfer Station.
2 Remove the Print Ribbon and HDP Film from the Printer.
3 If you have a can of compressed air, blow out all visible areas of the Printer
interior. (Note: Remove any debris that may be inside.)
OR
If you do not have a can of compressed air, use a cleaning pad from the Printer
Cleaning Kit to wipe out all visible areas inside the Printer. (Note: Remove any
debris that may be inside.)
Caution: Be extremely careful not to let any alcohol drip inside the
Printer!
4 Re-install the printing supplies.
5 Close the Print and Transfer Stations.
Cleaning outside the Printer
Step Procedure
1 The Printer has a durable casing that should retain its luster and appearance for
many years.
Clean it only with a Cleaning Pad from the Printer Cleaning Kit.
Caution: Do not use cleaning solvents of any kind or spray the cabinet
with a cleaner!