Freescale Semiconductor MC68HC908MR32 - Manual (Page 193)

SIM Registers
MC68HC908MR32 • MC68HC908MR16 Data Sheet, Rev. 6.1
Freescale Semiconductor 193
14.7.3 SIM Break Flag Control Register
The SIM break control register (SBFCR) contains a bit that enables software to clear status bits while the
MCU is in a break state.
BCFE — Break Clear Flag Enable Bit
This read/write bit enables software to clear status bits by accessing status registers while the MCU is
in a break state. To clear status bits during the break state, the BCFE bit must be set.
1 = Status bits clearable during break
0 = Status bits not clearable during break
Address: $FE03
BIt 7 6 5 4 3 2 1 Bit 0
Read:
BCFE R R R R R R R
Write:
Reset: 0
R = Reserved
Figure 14-16. SIM Break Flag Control Register (SBFCR)