Querying test devices – H3C Technologies H3C Intelligent Management Center User Manual
Page 96
87
{
Status—Latest status of the device. The status is determined by the highest alarm level that is not
cleared or recovered on the device. For example, if there are unrecovered Critical and Minor
alarms on a device, the status of the device is Critical.
{
Device Label—Label of the device in the IMC Platform. Click the label link to go to the device
details page.
{
Device IP Address—IP address of the device.
{
Last Test Time—Date and time of the latest test.
{
IP Phone Network Segment—Network segment where the connected IP phones reside.
{
Operation—Click the Operation icon
to display a menu that contains the following
options:
−
Configure IP Phone Network Segment—Select this option to assign network segments to the
IP phones connected to the device. For more information about the configuration procedure,
see
−
View Connected IP Phones—Select this option to view detailed information about the IP
phones connected to the device. For more information about IP phones, see “
Navigating the Test Device List
•
Click the Next Page icon
to page forward in the Test Device List.
•
Click the Last Page icon
to page forward to the end of the Test Device List.
•
Click the Previous Page icon
to page backward in the Test Device List.
•
Click the First Page icon
to page backward to the front of the Test Device List.
Click 8, 15, 50, 100, or 200 at the upper right of the Test Device List to configure how many items per
page you want to display.
NOTE:
You can sort the Test Device List by every field except the Operation field. Click the column label to
sort the list by the selected field.
Querying test devices
1.
Click the Service tab.
2.
Select Voice Service Manager > VoIP QoS Evaluation > Test Device from the navigation tree.
3.
In the Test Device Query area, specify one or more of the following query criteria:
{
Device Label—Enter a partial or complete device label of the test device. This field is case
insensitive.
{
Device IP Address—Enter a partial or complete IP address of the test device.
{
IP Phone Number—Enter a partial or complete phone number of an IP phone connected to the
test device.
{
Phone IP Address—Enter a partial or complete IP address of an IP phone connected to the test
device.
Empty fields are ignored.
4.
Click Query to display all test devices that match the query criteria.