H3C Technologies H3C Intelligent Management Center - Manual (Page 50)

41
{
Codec Type—Codec type of the call.
{
Call Link Duration (Sec)—Duration in seconds the call link has lasted.
{
Voice Data Transmission Duration (Sec)—Total amount of time used for transmitting voice data
during the call, in seconds.
{
Fax Duration (Sec)—Total amount of time used for sending faxes during the call.
{
Number of Faxed Pages—Total number of faxed pages.
{
Number of Received Bytes—Total number of bytes received by the call processor.
{
Number of Sent Bytes—Total number of bytes sent by the call processor.
{
Number of Received Packets—Total number of packets received by the call processor.
{
Number of Sent Packets—Total number of packets sent by the call processor.
3. Click Back to return to the History Call Information page.
Query active calls
You can query the active calls of an MSR media gateway device through simple query or advanced
query. Simple query includes several key parameters for quick search. Advanced query offers various
query criteria for precise match.
To perform a simple query for active calls:
1. Access the Active Call Information List page.
2. Click Simple Query in the top-right corner of the page.
3. Specify one or more of the following query criteria:
{
Connection ID—Enter a partial or complete connection ID for calls.
{
Type—Select a call type from the list: All, PSTN, or VoIP.
{
Number—Enter the phone number for the call.
{
Origin—Select the call origin from the list: All, Calling, or Called.
Empty fields are ignored.
4. Click Query to display all active calls that match the query criteria.
5. Click Reset to clear the query criteria and display all active calls.
To perform an advanced query for active calls:
6. Access the Active Call Information List page.
7. Click Advanced Query in the top-right corner of the page.
8. Specify one or more of the following query criteria:
{
Connection ID—Enter a partial or complete connection ID for calls.
{
Type—Select a call type from the list: All, PSTN, or VoIP.
{
Number—Enter a partial or complete phone number for calls.
{
Origin—Select the call origin from the list: All, Calling, or Called.
{
Call Setup Time From/To—Specify the call setup time range for query, in the form of
YYYY-MM-DD hh:mm:ss. You can enter the time range manually or select the time range.
{
Call Start Time From/To—Specify the call start time range for query, in the form of
YYYY-MM-DD hh:mm:ss. You can enter the time range manually or select the time range.
{
Call Duration (Sec) From/To—Specify the call duration range for query, in seconds.
{
State—Select the state of the calls: All, Unknown, Connecting, Connected, or Active.