H3C Technologies H3C Intelligent Management Center - Manual (Page 35)

26
2. View or modify application download configurations:
{
Main IP Address—IP address being used by the application downloader.
{
Backup IP Address—IP address that will be used by the application downloader after the
downloader restarts.
{
Main IP Port—Port number being monitored by the application downloader.
{
Backup IP Port—Port number that will be monitored by the application downloader after the
downloader restarts.
{
Main Device Name—Device name being used by the application downloader.
{
Backup Device Name—Device name that will be used by the application downloader after the
downloader restarts.
{
Payload Size—Maximum size of a single packet that can be downloaded, in bytes. After this
value is modified, the new value takes effect only after the VCX device restarts.
{
Ack Timeout (second)—Period of time during which the application downloader waits for the
acknowledgement from the requester, in seconds.
{
Num Retransmits—Maximum number of times that a downloaded package can be
retransmitted after a download failure.
{
Log Level—Level of the log in the application downloader log file.
{
Max Sessions—Maximum number of download sessions on the application downloader. After
the number of existing sessions exceeds this number, a new download request is ignored.
{
Poll Interval (minute)—Interval for detecting download requests, in minutes. The value 0
indicates that the download request polling is disabled. The value is an integer in the range of
15 to 1440.
3. Click OK.
Managing image files
To view the image files on the VCX device:
1. In the Application Downloader page, click the Device Mapping tab.
{
Index—Index of the image file.
{
Image File Name—Name of the image file stored on the application downloader.
{
Boot File Name—Name of the image file imported to the VCX device.
{
Boot Version—Version of the image file imported to the VCX device.
{
Image Version—Version of the image on the application downloader.
{
Modify—Click the Modify icon to modify information about the current image file. For
information about the parameters, see To add an image file.
{
Details—Click the Details icon to view the Image Details page.
2. Click Refresh to view information about the current image files.
To add an image file:
1. In the Application Downloader page, click Add.
The Add Device Mapping page appears.
2. Enter the parameters for the image file to be added:
{
Index—Enter the index of the image file.
{
Image File Name—Enter the name of the image file to be added. The value is a string of 1 to
128 characters.