H3C Technologies H3C Intelligent Management Center - Manual (Page 12)

3
Adding voice devices to the VSM
To use the VSM to manage voice devices on a VoIP network, make sure that voice devices on the
VoIP network are added to the IMC. You can add the voice devices on a VoIP network by using the
auto discovery function in the IMC Platform. Alternatively, you can manually add devices to the
IMC. VSM can automatically identify the added voice devices and add them to the resource view.
For information about managing voice devices, see “ 3 VCX device management ” and “ 5
Managing media gateway devices ”.
Importing the device software
Before deploying software on voice devices, import the software. VSM offers a voice software
library for fast and simply deploying software on the devices. Operators can import the voice
device software into the library for management. For more information, see “ Managing voice
software ”.
Deploying devices
To simplify device configuration and decrease the workload of network administrators, VSM
provides voice devices deployment wizard that guides users through the deployment of voice
devices on an easy-to-use and intuitive GUI. For more information, see ” Performing voice
deployment ”.
Troubleshooting
If an IP phone fault occurs on a VoIP network, VSM offers end to end troubleshooting on the
network topology. It can quickly locate and resolve the fault. For more information, see “ 10 Voice
service ” and “ 8 Viewing VSM topologies ”.
Viewing VoIP QoS
VSM provides visibility into VoIP QoS and status about voice devices and conversation links.
Operators can get information through the QoS overview, test results, or VSM reports. For more
information, see “ 11 Evaluating VoIP QoS ” and “ 13 Managing voice service reports ”.