Viewing a vcx device topology, Viewing a nbx device topology, Viewing a vcx – H3C Technologies H3C Intelligent Management Center User Manual
Page 80: Device topology
71
Voice device topology provides the following types:
•
VCX device topology—Logical connections between a VCX device and the registered IP phones.
•
NBX device topology—Logical connections between a NBX device and the registered IP phones.
•
IP phone physical topology—Physical connections between specified IP phones.
Viewing a VCX device topology
1.
Click the Service tab.
2.
From the left navigation tree, select Voice Service Manager > Resource View > VCX Devices.
3.
On the VCX Device List, click Display device topology icon in the Operation column for the
target VCX device.
4.
The VCX device typology window appears. On the topology, click the icon of the target VCX
device.
The following information appears:
{
Label—Device label of the VCX device in VSM.
{
IP Address—The management IP address of the VCX device.
5.
Click the icon of an IP phone.
The following information appears:
{
IP Address—Management IP address of the IP phone.
{
MAC Address—MAC address of the IP phone.
{
Subnet Mask—Subnet mask of the IP address of the IP phone.
{
Number—Phone number of the IP phone.
{
Label—Caller ID of the IP phone.
{
Username—Username of the IP phone.
{
Software Version—Software version of the IP phone.
{
Status—State of the IP phone: Online, Offline, or Unknown.
{
Registered VCX Name—Device label of the server on which the IP phone is registered.
{
Registered VCX IP Address—IP address of the server on which the IP phone is registered.
6.
Select one or more IP phones, right-click any IP phone icon, and select View physical topology
from the shortcut menu. The physical topology of the selected IP phones appears. On the topology,
you can view physical connections between the IP phones. For more information, see “
7.
Select two IP phones, right-click any IP phone icons, and select IP phone end-to-end diagnoses
from the shortcut menu. The IP phone end-to-end diagnoses window appears. In the window, you
can view the link failures between the IP phones. For more information, see “
Viewing a NBX device topology
1.
Click the Service tab.
2.
From the left navigation tree, select Voice Service Manager > Resource View > NBX Devices.
3.
On the NBX Device List, click the Display device topology icon in the Operation column for the
target NBX device.
On the topology, click the icon of the target NBX device.