H3C Technologies H3C Intelligent Management Center - Manual (Page 38)

29
3. Click Refresh to view information about the currently monitored endpoints.
To add an endpoint to be monitored:
1. Click Add.
The Add QoS Monitor Endpoint page appears.
2. Enter the following parameters for the endpoints to be monitored:
{
IP Address—Enter the IP address of the endpoint to be added.
{
Net Mask—Enter the network mask of the endpoint to be added.
{
Computed MOS Value Threshold—Enter the MOS threshold for the endpoint to be added.
{
Jitter Value Threshold(ms)—Enter the jitter threshold for the endpoint to be added, in
milliseconds.
{
Packet Loss Value Threshold(%)—Enter the packet loss ratio threshold for the endpoint to be
added.
{
Round Trip Delay Value Threshold(ms)—Enter the round trip delay threshold for the endpoint to
be added, in milliseconds.
3. Click OK.
To delete monitored endpoints:
1. In the QoS Monitoring Endpoints list, select one or more endpoints to be deleted.
2. Click Delete.
To modify the configurations of monitored endpoints, click the Modify icon to modify the
configurations of the currently monitored endpoint. For more information about how to modify monitored
endpoint configurations, see “To add an endpoint to be monitored”.
To view information about monitored endpoints, click the Details icon to view the configurations of
the currently monitored endpoint.
Navigating the QoS Monitoring Endpoints list
• Click the Previous Page icon to page backward in the QoS Monitoring Endpoints list.
• Click the Next Page icon to page forward in the QoS Monitoring Endpoints list.
• Click the First Page icon to page backward to the front of the QoS Monitoring Endpoints list.
• Click the Last Page icon to page forward to the end of the QoS Monitoring Endpoints list.
Click 8, 15, 50, 100, or 200 at the upper right of the QoS Monitoring Endpoints list to configure how
many items per page you want to display.
NOTE:
You can sort the QoS Monitoring Endpoints list by the IP Address, Net Mask, or Computed MOS Value
Threshold field. Click the column label to sort the list by the selected field.
Configuring trusted endpoints
To view the configurations of trusted endpoints:
1. Click the Trusted Endpoints tab.
2. View information about the trusted endpoint:
{
Index—Index of the trusted endpoint.
{
IP Address—IP address of the trusted endpoint.