H3C Technologies H3C Intelligent Management Center - Manual (Page 101)

92
{
Source Device Name—Enter a partial or complete device label of the source device.
{
Source Device IP Address—Enter a partial or complete IP address of the source device.
{
Destination Device Name—Enter a partial or complete device label of the destination device
label.
{
Destination Device IP Address—Enter a partial or complete IP address of the destination device.
{
Affected Phones—Enter a partial or complete phone number of an IP phone.
{
Test Results—Select a test result type from the Test Results list. Options are All, High quality,
Middle quality, Low quality, and Fault.
Empty fields are ignored.
2. Click Query to display all test results that match the query criteria.
3. Click Reset to clear the query criteria and display all test results.