FEC DSP1500 (SAN3) - Manual (Page 64)

PAGE ６－2
enFORCE Operation Manual
6.1 Display and Programming Unit (DP*S)
An optional detachable display / programming unit is available for the SAN Unit. The display unit
allows the viewing of press results as well as viewing / programming of press parameters if the
optional DSP software is not being used. The DP1S & DP2S are for the SAN3-24S/40S and the
DP3S & DP4S are for the SAN3-120S.
DP1S & DP3S
DP2S & DP4S (RS-232)
The DP2S and DP4S have the same functionality as the DP1S and DP3S with the added function
of a serial RS-232 port for output of press data from the associated SAN Unit. The RS232 port
may also be used to input external measurement data in applications requiring an external
measurement probe.
Chapter 6: System Operation