Sanyo DSR-M814 - Manual (Page 63)

62
SETTINGS
9. POWER LOSS/USED TIME
You can check the date/time of power failures and the
amount of used hard disk operation time.
[ ] button [MENU] button [ ] button
[ ] button [EXIT/OSD] button
1 Press the [MENU] button.
The [MENU] button lights, and the
2 Select “8. POWER LOSS/USED TIME”,
and press the [ ] button.
The screen is
displayed.
(1) LOSS/RECOVER:
Displays the date and time of the last 4 power
failures and the date/time of recovery.
Displays the date/time at which a power failure
occurred.
The number on the left is the number of power
failures (example: #010). This number is reset to
“000” after exceeding “999”.
(2) DISK1 USE:
Displays the total used amount of disk 1
operation time.
(3) DISK2 USE:
Displays the total used amount of disk 2
operation time (when second disk has been
added).
(4) POWER:
Displays the amount of power ON time for the
digital video recorder.
(1)
(2)
(3)
(4)
3 Press the [EXIT/OSD] button.
The display returns to the normal screen.
e00_VDH_M814.book Page 62 Thursday, October 28, 2004 9:59 AM