Sanyo DSR-M814 User Manual
Page 37
36
SETTING THE LANGUAGE AND TIME
SETTINGS
This section describes how to have the time synchronized
automatically when two or more digital video recorders are
connected. If you set the
all the connected devices are synchronized to the same
time (to the nearest second) every day at 5:00.
(Default setting: 01:00)
9
Press the [
] or [
] button to select
the desired day of the week, then press
the [
] button.
10
Press the [
] or [
] button to select
the desired month, then press the [
]
button.
11
Press the [
] or [
] button to select
the desired time, then press the [
]
button.
Set the desired minutes in the same manner.
The
finished.
Synchronizing the time with other
DSR-M814 DVRs (with two or more
DVRs connected)
1
Use a cable to connect the CLOCK ADJ
OUT terminal on the rear panel of one
digital video recorder to the CLOCK
ADJ IN terminal on the second digital
video recorder.
Terminal number
6: CLOCK ADJ IN
7: CLOCK ADJ OUT
8: C (ground)
Do not use a loop connection.
2
Press the [
] or [
] button to move
the cursor to “ADJUST. TIME”.
3
Press the [ ] button.
“01” flashes.
(continued)
7 8 9 10 11 12 13 14 15 16 17 18 19
6 7 8 9 10 11 12 13 14 15 16 17 18 19
To 3rd DVR
(8)
(6)
1st DVR
2nd DVR
e00_VDH_M814.book Page 36 Thursday, October 28, 2004 9:59 AM