Sanyo DSR-M814 User Manual
Page 57
56
SECURITY LOCK SET
SETTINGS
2
Select “6. SECURITY LOCK SET”, and
press the [ ] button.
The
“LEVEL PASSWORD (4-8) USE” at the top of the
screen is the screen title. You cannot move the
cursor to this item.
3
Press the [ ] button.
The first password entry bar “-” flashes.
4
Press the [
] and [
] buttons to select
the character to enter.
Example:
Selecting “1”
5
Press the [ ] button.
The second password entry bar flashes.
6
Repeat steps 4 to 5 to enter the
remaining digits (“23456AB” in this
example).
To set a 4-digit password
When you have entered four digits, and the fifth
password entry bar is flashing, press the [ ]
button.
7
When you have entered the password,
press the [ ] button.
The cursor moves to “OFF” (flashing).
8
Press the [
] or [
] button to select
“ON”.
If you select “OFF” for the “ADMIN” setting, you
cannot set the “USER” password.
9
When you have finished making the
setting, press the [ ] button.
The cursor moves to “USER”.
If you do not want to set a user password, the
password setting is now finished.
Press the [
] or [
] button to move the cursor to
“REC CONTROL”, to set the authorization for
recording and playback operation. ( P.57)
e00_VDH_M814.book Page 56 Thursday, October 28, 2004 9:59 AM