Sanyo DSR-M814 User Manual
Page 15
14
ADJUSTING THE DISPLAY
OPERATION
To return to the quad screen
Follow the steps below to display the image from a
specified channel in a single screen.
To return to the quad screen
While the quad screen is displayed, press the [QUAD/
SEQUENCE] button to toggle through single screens in
sequence.
1
Press the [QUAD/SEQUENCE] button.
The image from each channel is displayed
sequentially in single screens. Under the default
settings, the channel switches automatically every 1
second.
2
Press the [QUAD/SEQUENCE] button.
The quad screen is displayed.
Displaying the image from a specified
channel in a single screen
1
Press the desired [CHANNEL] button.
The indicator on the [CHANNEL] button lights. The
image for the corresponding channel is displayed in
the screen.
2
Press the [QUAD/SEQUENCE] button.
The quad screen is displayed.
[QUAD/SEQUENCE] button
[CHANNEL] buttons
HI A
05 - 10 - 04 08 : 30 : 35 AL 00015
HI A
05 - 10 - 04 08 : 30 : 35 AL 00015
e00_VDH_M814.book Page 14 Thursday, October 28, 2004 9:59 AM