Sanyo DSR-M814 - Manual (Page 42)

SCREEN SET MENU
41
SETTINGS
By setting the motion sensor on the screen, any movement
by the subject will automatically activate alarm recording.
You can set the following items:
z Motion detection position on screen
z Number of camera for which to set motion sensor
z Motion sensor sensitivity (Default setting is OFF.)
9 When you have finished making the
settings, press the [EXIT/OSD] button.
The display returns to the normal screen.
The screen displays the set camera title.
Setting the motion sensor
1 Press the [MENU] button.
The [MENU] button lights, and the
2 Select “2. SCREEN SET MENU”, and
press the [ ] button.
The screen is displayed.
FLOOR 1 2 Set camera title
H I A
0 5 - 1 0 - 0 4 0 8 : 3 0 : 35AL 0 0 0 1 5
[ ] button
[MENU] button
[ ] button
[ ] button [EXIT/OSD] button
[CHANNEL]
buttons
[ ] button
3 Select “3. MOTION SENSOR SET”, and
press the [ ] button.
The motion sensor setting screen for CAMERA NO.
1 appears.
4 Press the desired [CHANNEL] button to
select the desired camera number.
5 Press the [ ] or [ ] button to select
“LEVEL,” then press the [
] or [ ]
button to set the sensitivity.
The level can be set to a value between 1 and 10.
The lower the value, the higher the sensitivity.
(Default setting: OFF)
A confirmation tone sounds when making sensor
settings.
Displays
current
camera
number
H I A
0 5 - 1 0 - 0 4 0 8 : 3 0 : 3 5 A L 0 0 0 1 5
e00_VDH_M814.book Page 41 Thursday, October 28, 2004 9:59 AM