Switching audio channels – Sanyo DSR-M814 User Manual
Page 22
PLAYING BACK VIDEOS
21
OPERATION
Follow the steps below to turn the audio ON or OFF, or
switch the audio channels.
Press the [AUDIO] button.
The [AUDIO] button flashes during audio settings mode.
Each time you press the button, the audio channels switch
as shown below.
The channel indicator lights when that channel is playing
back.
During recording
During playback
During playback, you cannot playback audio from one
specific channel.
Switching audio channels
[STILL] button
Slow
direction
Reverse slow
direction
With still image
display
Hold down
for
at least 2 seconds
Hold down
for at least
2 seconds
[STILL] button
[AUDIO] button
CHANNEL indicators
CH3+CH4
CH1+CH2
AUTO
CH3
CH2
CH4
OFF
CH1
CH3+CH4
CH1+CH2
OFF
AUTO
e00_VDH_M814.book Page 21 Thursday, October 28, 2004 9:59 AM