Sanyo DSR-M814 - Manual (Page 62)

RS-485/NETWORK SET
61
SETTINGS
Connect the digital video recorder’s RS-485 (A, B) control
terminals to the system controller, hard disk digital recorder
or similar device.
Settings (‹ indicates default setting.)
RS-485 connections and settings
1 Press the [MENU] button.
The [MENU] button lights, and the
2 Select “7. RS-485/NETWORK SET”, and
press the [ ] button.
The screen is displayed.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
RS-485A
RS-485B
C
[ ] button [MENU] button [ ] button
[ ] button [EXIT/OSD] button
(1)
(2)
(3)
(4)
Item Setting Description
(1)
DATA
SPEED
2400
4800
9600
‹ 19200
Used to select the
communication speed.
(Unit: bps)
(2)
STATUS
INFO
ON
Enables status information to be
sent on the RS-485 line.
‹ OFF Not set
(3)
ALARM
INFO
ON
Enables alarm information to be
sent on the RS-485 line.
‹ OFF Not set
(4) ADDRESS
000 to 127
(‹001)
When connecting multiple
recorders, different address
numbers are set for each.
3 Press the [ ] and [ ] buttons to select
the desired item, then press the [ ]
button.
4 Press the [ ] and [ ] buttons to
change the setting, then press the [ ]
button.
5 Repeat steps 3 to 4 to set the other
items as needed.
6 When you have finished making the
settings, press the [EXIT/OSD] button.
The display returns to the normal screen.
e00_VDH_M814.book Page 61 Thursday, October 28, 2004 9:59 AM