Sanyo DSR-M814 - Manual (Page 39)

38
SETTINGS
3. SCREEN SET MENU
MONITOR SET
z “SEQUENCE” is used to set the time interval used for
switching screens when displaying the image from each
channel sequentially.
z “DISPLAY” setting is used when an alarm is generated.
It sets whether to display the image from the channel
that generated the alarm on a single screen, or whether
to display on the quad screen.
z “ALARM PRIORITY” sets the display method for alarm
recording screens when an alarm is generated on
another channel during alarm recording.
Example 1: Display screens in order of alarms.
Example 2:Display alarm recordings on the single
screen sequentially.
z “MASK SET” is used to hide the monitor display of some
channel images in the normal screen and playback
screen.
TITLE SET
z Lets you set titles for the cameras.
Screen settings
H I A
05 - 10- 04 08 : 30 : 35 AL 00015
HI A
05 - 10 - 04 08 : 30 : 35 AL 00015
HI A
05 - 10 - 04 08 : 30 : 35 AL 00015
HI A
05 - 10 - 04 08 : 30 : 35 AL 00015
H I A
05- 10 - 04 08 : 30 : 35 AL 00015
HI A
05 - 10 - 04 08 : 30 : 35 AL 00015
H I A
05 - 10- 04 08 : 30 : 35 AL 00015
FLOOR 1 2 Set camera title
H I A
0 5 - 1 0 - 0 4 0 8 : 3 0 : 3 5 A L 0 0 0 1 5
e00_VDH_M814.book Page 38 Thursday, October 28, 2004 9:59 AM