HP 3162 - Manual (Page 92)

Monitoring and Testing
5-28 3162-A2-GB20-40 August 2000
Aborting Test Patterns
Use the Abort Tests command to stop all test patterns or any selected test pattern
active on the DSU/CSU.
"
Procedure
To abort test patterns:
1. From the Main Menu screen, select Test.
2. From the Test screen, select Abort Tests.
Lamp Test
Use the Lamp Test command to start or stop a test of the DSU/CSU front panel
LEDs.
Starting a Lamp Test
"
Procedure
To start a Lamp test:
1. From the Main Menu screen, select Test.
2. From the Test screen, select Device Tests.
3. For the Lamp Test command, select Start.
Aborting a Lamp Test
"
Procedure
To abort the Lamp test:
1. From the Main Menu screen, select Test.
2. From the Test screen, select Device Tests.
3. For the Lamp Test command, select Stop.