Configuring the 10baset port – HP 3162 User Manual

Page 45

Configuration

4-3

3162-A2-GB20-40

August 2000

Configuring the 10BaseT Port

To configure the 10BaseT port for SNMP access:

Set the Port Use configuration option to your network protocol.

Set the 10BaseT port’s IP address and subnet mask.

Set the default gateway address.

Procedure

To configure the 10BaseT port:

1. From the Main Menu screen, select Configuration.

2. From the Load Configuration From screen, select Current.

3. From the Configuration Edit/Display screen, select User Interface.

4. From the User Interface screen, select Ethernet Port.

The Ethernet Port Options screen appears.

5. In the Port Use field, select 802.3 or Version 2.

6. Enter the IP Address, Subnet Mask, and Default Gateway Address.

7. When you are through making configuration option changes, select Save to

store these changes in nonvolatile memory. If you want to return to the User
Interface screen, press your Esc key and then save your changes from that
screen.

УУУУУУУУУУУУУУУУУУУУУУУУУ

main /config/user/ethernet

Customer ID: Node A

Model: 3162

ETHERNET PORT OPTIONS

Port Use:

Version 2

IP Address:

000.000.000.000

Clear

Subnet Mask:

000.000.000.000

Clear

Default Gateway Address:

000.000.000.000

Clear

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Ctrl-a to access these functions, ESC for previous menu

MainMenu

Exit

Save

Figure 4-2.

Ethernet Port Options Screen