Setting customer identification, Procedure – HP 3162 User Manual

Page 44

Configuration

4-2

3162-A2-GB20-40

August 2000

Setting Customer Identification

The customer identification is used to uniquely identify the DSU/CSU.

Procedure

To change the customer identification (Customer ID):

1. From the Main Menu screen, select Control.

2. From the Control screen, select Customer ID.

The Customer ID screen appears (Figure 4-1).

3. Use the Customer ID field to set the customer identification.

The customer identification may be up to 8 characters long.

Select Clear to remove all the characters in the associated field.

4. Select Save to store the information in nonvolatile memory.

In addition to the customer identification, you may also enter a system name,
system location, and system contact. Although only 40 characters are displayed
for these fields, you may enter up to 255 characters. The fields scroll as the
additional characters are added.

УУУУУУУУУУУУУУУУУУУУУУУУУ

main /control/customer id

Customer ID: Node A

Model: 3162

Slot: xx

CUSTOMER ID

Customer ID:

Clear

System Name:

Clear

System Location:

Clear

System Contact:

Clear

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Ctrl-a to access these functions, ESC for previous menu

MainMenu

Exit

Save

Customer
Identification
Field

Figure 4-1.

Customer Identification Screen