Configuring ds0 channels for robbed bit signaling, Configuring, Ds0 channels for robbed bit signaling – HP 3162 User Manual

Page 57: Procedure

Configuration

4-15

3162-A2-GB20-40

August 2000

Configuring

DS0 Channels for Robbed Bit Signaling

By using the DTE configuration options, you can specify which DS0 channels
carry Robbed Bit Signaling (RBS) information for voice channels.

Procedure

To specify DTE Drop/Insert (DSX-1) channels used to carry voice information:

1. From the Main Menu screen, select Configuration.

The Load Configuration From screen appears.

2. From the Load Configuration From screen, select Current.

The Configuration Edit/Display screen appears.

3. From the Configuration Edit/Display screen, select DTE.

The DTE Interface Options screen appears (Figure 4-9).

4. Enter RBS for each DS0 channel that you want to configure for voice

applications.

The designation None indicates the absence of RBS information. These
channels (known as Clear Channels) are used for data applications.

5. Select Save to store these settings in nonvolatile memory.

УУУУУУУУУУУУУУУУУУУУУУУУУ

main /config/dte

Customer ID: Node A

Model: 3162

Slot: xx

DTE INTERFACE OPTIONS

Interface Status:

Enable

Line Framing Format:

ESF

Line Coding Format:

B8ZS

Line Equalization:

0-133

DTE LB on External Contact:

Disable

Send all Ones on DTE Failure:

Enable

DTE

Signaling: D01 D02 D03 D04 D05 D06 D07 D08

None None None None None None None None

D09 D10 D11 D12 D13 D14 D15 D16

RBS None None None None None None None

D17 D18 D19 D20 D21 D22 D23 D24

None None None None None None None None

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Ctrl-a to access these functions, ESC for previous menu

MainMenu

Exit

Save

Configured
for RBS

Figure 4-9.

DTE to Interface Options Screen