HP 3162 User Manual
Page 138
Configuration Options
C-40
3162-A2-GB20-40
August 2000
General Options
Value (Default in Bold)
Generate Yellow Alarm Signals
Enable, Disable
Initial Self Test
Enable, Disable
Primary Clock Source
Network, DTE, Internal, External, Port 1
External Clock Rate (KHz)
2048, 1544, 8
Test Timeout
Enable, Disable
Test Duration
1 –120 (Default = 10)
User Interface: Communication Port
Options
Value (Default in Bold)
Port Use
Mgmt, ASCII, Terminal
Port Type
Asynchronous, Synchronous
Clock Source
Internal, External
Data Rate
1.2, 2.4, 4.8, 9.6, 14.4, 19.2, 38.4
Character Length
7, 8
Parity
None, Even, Odd
Stop Bits
1, 1.5, 2
Ignore Control Leads
Disable, DTR
Password Required
Enable, Disable
Inactivity Timeout
Enable, Disable
Disconnect Time
1 –60 (Default = 5)
User Interface: External Device Options
Value (Default in Bold)
External Device Commands
Disable, AT, Other
Dial-In Access
Enable, Disable
Connect Prefix
Text Field, Clear
Connect Indication String
Text Field, Clear
Escape Sequence
Text Field, Clear
Escape Sequence Delay (sec)
None, 0.2, 0.4, 0.6, 0.8, 1.0
Disconnect String
Text Field, Clear