HP 3162 - Manual (Page 124)

Configuration Options
C-26 3162-A2-GB20-40 August 2000
Management and Communication Configuration
Options
The Management configuration options are divided into four tables as follows:
H Communication Protocol Configuration Options (Table C-12)
H
General SNMP Management Configuration Options ( Table C-13 )
H SNMP NMS Security Configuration Options ( Table C-14 )
H
SNMP Traps Configuration Options ( Table C-15 )
Communication Protocol Configuration Options
Table C-12. Communication Protocol Configuration Options (1 of 2)
Node IP Address: Text Field
Text Field Clear
Specifies the IP address needed to access the DSU/CSU. Since this IP Address is not
bound to a particular port, it can be used for remote access via the FDL or EDL
management link.
Text Field – Allows you to edit or display the IP address for the DSU/CSU.
Clear – Allows you to clear the IP address for the DSU/CSU. The IP address is set to
000.000.000.000.
Node Subnet Mask: Text Field
Text Field Clear
Specifies the subnet mask needed to access the DSU/CSU. Since this subnet mask is
not bound to a particular port, it can be used for remote access via the FDL or EDL
management link.
Text Field – Allows you to edit or display the subnet mask for the DSU/CSU.
Clear – Allows you to clear the subnet mask for the DSU/CSU. The subnet mask is set
to 000.000.000.000. If the subnet mask is 000.000.000.000, the IP protocol creates a
default subnet mask based on the class of the IP address (Class A: 255.000.000.000,
Class B: 255.255.000.000, or Class C: 255.255.255.000).