HP 3162 - Manual (Page 130)

Configuration Options
C-32 3162-A2-GB20-40 August 2000
Table C-15. SNMP Traps Configuration Options (3 of 3)
Link Trap Interfaces: All
Network DTE T1s Ports All
Specifies which interfaces generate linkUp and linkDown trap messages. These traps
are supported on the T1 interfaces (network and DTE Drop/Insert) and the synchronous
data ports.
Network – Sends trap messages for linkUp and linkDown events occurring on the
network interface.
DTE – Sends trap messages for linkUp and linkDown events occurring on the DTE
Drop/Insert (DSX-1) interface. This selection does not appear if the DTE Drop/Insert
(DSX-1) interface is disabled.
T1s – Sends trap messages for linkUp and linkDown events occurring on the network or
DTE Drop/Insert (DSX-1) interface.
Ports – Sends trap messages for linkUp and linkDown events occurring on the
synchronous data ports.
All – Sends trap messages for linkUp and linkDown events occurring on the network
interface, DTE Drop/Insert (DSX-1) interface, or the synchronous data ports.
NOTE: This configuration option is not available if the Link Traps configuration
option is not configured to generate trap messages for linkUp or linkDown
events.