Initiating an asynchronous terminal session, Ending an asynchronous terminal session – HP 3162 User Manual

Page 31

Operation

3-5

3162-A2-GB20-40

August 2000

Initiating an Asynchronous Terminal Session

You can configure and manage the DSU/CSU from an asynchronous terminal
that is configured for 9.6 kbps, 8 characters, no parity, and 1 stop bit.

You can connect the asynchronous terminal directly to the COM port of the
DSU/CSU, or you can establish a remote connection using dial-in or Telnet
access.

Once the appropriate access is established, the Main Menu screen (Figure 3-2)
appears (unless a password is required).

If a password is required, the Login screen displays the prompt for password
input. (Refer to

Entering a Password to Gain Access

on page 3-10.)

To move between the Screen area and the Screen Function Keys area
(

Figure 3-2

), press Ctrl-a (Control key and a).

From the Screen area, you may select the Status, Test, Configuration, or
Control branches.

Ending an Asynchronous Terminal Session

To end the asynchronous terminal session from any screen, press Ctrl-a to move
from the Screen area to the Screen Function Keys area (Figure 3-2), and then
select Exit.

ООООООООООООООООООООООООО

main

Customer ID: Node A

Model: 3162

Slot: xx

MAIN MENU

Status

Test

Configuration

Control

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Ctrl-a to access these functions

Exit

Screen
Area

Screen
Function
Keys
Area

Figure 3-2.

Main Menu Screen