High End Systems Technobeam - Manual (Page 98)

Technobeam
®
User Manual Menu Options 3-29
Editing or Creating an On-Board Memory Scene (EDIT)
This menu item allows you to edit or create a scene using the fixture’s
on-board scene memory. Using this menu option, you can change the
value of any construct in any of the on-board scenes. For detailed
information on editing or creating a scene, see Chapter 4.
To edit/create a scene:
1. Press and hold the
2. Using the and arrow buttons, scroll to the “PRST” menu
and press the button to select the “PRST” menu.
3. Using the and arrow buttons, scroll to the “EDIT” menu
and press the button to select the “EDIT” menu.
4. Using the and arrow buttons, scroll to the scene (“SN01”
to “SN16”) that you want to edit or create and press the button
to select the desired scene.
Copying an On-Board Memory Scene (COPY)
1. Press and hold the
2. Using the and arrow buttons, scroll to the “PRST” menu
and press the button to select the “PRST” menu.
3. Using the and arrow buttons, scroll to the “COPY” menu
and press the button to select the “COPY” menu.
4. The LED will display “FROM.” Press the button to enter the
“FROM” menu.
5. Using the and arrow buttons, scroll to the scene that you
want to copy from (source scene) for either user A (“FA01” - “FA16”) or
user B (“FB01” - “FB16”). Press the button to select the desired
scene.
6. The LED will display “TO.” Press the button to enter the “TO”
menu.
7. Using the and arrow buttons, scroll to the scene that you
want to copy to (destination scene) for either user A (“TA01” - “TA16”)
or user B (“TB01” - “TB16”). Press the button to select the
desired scene.
The fixture will copy the desired scene to the selected scene location.
When the fixture finishes the copy successfully, “DONE” will appear
briefly in the fixture’s LED display.
Capturing a Preset Scene (CAPT)
Preset capturing is a way to automate the creation of scenes on
multiple Technobeam-i fixtures connected to a DMX 512 link. Use a
to
to
to