High End Systems Technobeam - Manual (Page 87)

3-18 Menu Options Technobeam
®
User Manual
6. Using the and arrow buttons, choose the “A
→
Β ” option
to copy user A presets to user B, or the “B
→
Α ” option to copy user B
presets to user A. Press the button to select the desired
option.
Copying User Settings (SETT)
Use this menu item to copy the fixture’s user settings from user A to
user B or vice versa. The user settings for each user type are listed in
the section titled “Setting the User Type (USER)” on page 3-16.
Note This options copies all user settings at one time.
To copy user settings:
1. Press and hold the
2. Using the and arrow buttons, scroll to the “MODE” menu
and press the button to select the “MODE” menu.
3. Using the and arrow buttons, scroll to the “USER” menu
and press the button to select the “USER” menu.
4. Using the and arrow buttons, scroll to the “COPY” menu
and press the button to select the “COPY” menu.
5. Using the and arrow buttons, scroll to the “SETT” menu
and press the button to select the “SETT” menu.
6. Using the and arrow buttons, choose the “A
→
B” option
to copy user A settings to user B, or the “B
→
A” option to copy user B
settings to user A. Press the button to select the desired
option.
Copying User Presets and Settings (ALL)
Use this menu item to copy the fixture’s 16 user presets and fixture
settings from user A to user B or vice versa. The user settings for each
user type are listed in the section titled “Setting the User Type (USER)”
on page 3-16.
Note This options copies all user settings and all 16 presets at
one time.
To copy user presets and settings:
1. Press and hold the
2. Using the and arrow buttons, scroll to the “MODE” menu
and press the button to select the “MODE” menu.
3. Using the and arrow buttons, scroll to the “USER” menu
and press the button to select the “USER” menu.
or
or