High End Systems Technobeam - Manual (Page 82)

Technobeam
®
User Manual Menu Options 3-13
Changing the Display Output (DSPL)
This menu item allows you to change the appearance of the fixture’s
alphanumeric LED display. You can set the display on or off, or you
can dim the display to reduce visibility.
To change the display output:
1. Press and hold the
2. Using the and arrow buttons, scroll to the “SET” menu
and press the button to select the “SET” menu.
3. Using the and arrow buttons, scroll to the “DSPL” menu
and press the button to select the “DSPL” menu.
4. Using the and arrow buttons, choose the “ON” option to
set the LED display to normal intensity, the “OFF” option to turn the
LED display off, or the “DIM” option to reduce the LED display visibility.
Press the button to select the desired option.
Note If you set the LED display off, the LED display will be
turned off only when you exit the menu system.
Inverting LED Characters (D/IN)
This menu item allows you to invert the orientation of the LED
display’s alphanumeric characters. This option is useful if your fixture
is standing upright (i.e., resting on its bottom panel on the floor).
To invert the LED display:
1. Press and hold the
2. Using the and arrow buttons, scroll to the “SET” menu
and press the button to select the “SET” menu.
3. Using the and arrow buttons, scroll to the “D/IN” menu
and press the button to select the “D/IN” menu.
4. Using the and arrow buttons, choose the “ON” option to
invert the fixture’s alphanumeric characters, or the “OFF” option to
return the fixture’s alphanumeric characters to normal orientation.
Press the button to select the desired option.
Changing the Control Method (CHNL)
Use this menu item if your fixture is currently set to the fixture
number control method and instead, you want to use the DMX start
channel control method, or vice versa. To simply change an existing
fixture number to a different fixture number (or DMX start channel to a
different DMX start channel), see “Address Menu (ADDR)” on page 3-10.