High End Systems Technobeam - Manual (Page 96)

Technobeam
®
User Manual Menu Options 3-27
The following sensor information is available:
• LTR - view whether the litho rotate (within the wheel) sensor is
obstructed (“OFF”) or is not obstructed (“ON”)
• LTO - view whether the litho wheel sensor is obstructed (“OFF”) or
is not obstructed (“ON”)
• COLR -view whether the color wheel sensor is obstructed (“OFF”) or
is not obstructed (“ON”)
• FX - view whether the effects wheel sensor is obstructed (“OFF”)
or is not obstructed (“ON”)
To view the specified sensor information:
1. Press and hold the
2. Using the and arrow buttons, scroll to the “INFO” menu
and press the button to select the “INFO” menu.
3. Using the and arrow buttons, scroll to the “SENS” menu
and press the button to select the “SENS” menu.
4. Using the and arrow buttons, scroll to the desired option
(listed above) and press the button to select the desired option
to view its sensor information.
Resetting Fixture Hours (F/RS)
This menu item allows you to track the number of hours the fixture has
been operating.
To reset the fixture hours to zero:
1. Press and hold the
2. Using the and arrow buttons, scroll to the “INFO” menu
and press the button to select the “INFO” menu.
3. Using the and arrow buttons, scroll to the “F/RS” option
and press the button to select the “F/RS” option*. The LED will
display “0000” when the fixture hours are reset.
*Note This option has a 5-second delay to avoid inadvertent
changes. To reset the fixture hours, you must press and
hold the button for at least 5 seconds.
Resetting Lamp Hours (L/RS)
This menu item allows you to track the number of hours the lamp has
been operating. You should reset the lamp hours every time you
change the lamp.