beautypg.com
3-28
Menu Options
Technobeam
®
User Manual
To reset the current lamp hours to zero:
1.
Press and hold the
2.
Using the and arrow buttons, scroll to the “INFO” menu and press the button to select the “INFO” menu.
3.
Using the and arrow buttons, scroll to the “L/RS” option and press the button to select the “L/RS” option*. The LED will display “0000” when the lamp hours are reset.
*Note
This option has a 5-second delay to avoid inadvertent changes. To reset the lamp hours, you must press and hold the button for at least 5 seconds.
Preset Menu (PRST)
The Preset menu allows you to turn preset playback off or on, view which scene is currently playing, and create/edit a scene using the on-board memory to program the fixture for stand-alone operation. This menu also allows you to copy a scene within the fixture’s on-board memory, capture a scene from your DMX controller to the fixture’s on-board memory, and enable the fixture’s factory-programmed preset sequence (self demo).
Setting Preset Playback (PLAY)
This menu option allows you to turn preset playback on or off and view which scene is currently playing in preset playback mode.
To set preset playback on or off, or to view the current scene:
Using the and arrow buttons, scroll to the “PRST” menu. Press the button to select the “PRST” menu.
Using the and arrow buttons, scroll to the “PLAY” menu. (This will be the first option displayed). Press the button to select the “PLAY” menu.
4.
Using the and arrow buttons, scroll to the “ON” option to set preset playback on, the “OFF” option to set preset playback off, or the “SCN” option to display which scene is currently playing. Press the button to select the desired option.
Note
Scene 1 must be programmed before the fixture can play back scenes.
